Example: Milling Machine With General Axis Configuration And Tracyl - Siemens SINUMERIK 828D Commissioning Manual

Configuring cycles
7.4 Milling
7.4.5

Example: Milling machine with general axis configuration and TRACYL

Example of a general axis configuration and activation of TRACYL on the following machine:
Axis configuration
For the machine shown with rotary axis A and C, you must configure the following machine
data:
MD10000 $MN_AXCONF_MACHAX_NAME_TAB[ ]
[0] = MX1
[1] = MY1
[2] = MZ1
[3] = MSP1
[4] = MA1
[5] = MC1
MD35000 $MA_SPIND_ASSIGN_TO_MACHAX[ ]
[AX1] = 0
[AX2] = 0
[AX3] = 0
[AX4] = 1
[AX5] = 0
[AX6] = 0
100
1st machine axis
2nd machine axis
3rd machine axis
4th machine axis
5th machine axis
6th machine axis
X is not a spindle
Y is not a spindle
Z is not a spindle
MSP1 spindle 1
A is not a spindle
C is not a spindle
Machine axis name
Assignment of spindle to machine axis
Commissioning Manual, 10/2015, 6FC5397-3DP40-5BA3
SINUMERIK Operate