Configuration Files - Siemens SINUMERIK 828D Commissioning Manual

1.3

Configuration files

Introduction
The figure below shows the manufacturer's folder "System CF-Card/oem/sinumerik/hmi" on
the control.
Figure 1-3
The following files in the manufacturer's folder "System CF-Card/oem/sinumerik/hmi" on the
control are needed to configure user dialogs:
Table 1-2 Files for configuration
File type
Script file
Text file
Easy XML
Programming Manual, 10/2015, 6FC5397-3DP40-5BA3
Manufacturer's folder
Name of the file
"xmldial.xml"
"oem_xml_screens_xxx.ts"
Meaning
This script file uses XML tags
to control how the configured
softkey menus and dialog
forms in SINUMERIK Operate
will appear in the <CUSTOM>
operating area.
This text file contains the texts
for the menus and dialog forms
for the individual languages.
Generating user dialogs
1.3 Configuration files
Storage location in operating
area Setup > System data
Manufacturer's folder > sub‐
directory "appl" for the appli‐
cations
Manufacturer's folder > sub‐
directory "lng" for the lan‐
guages
9