Siemens SINUMERIK 828D Commissioning Manual page 385

Time display formats
Formats
H:m:s AP
h:m:s ap
HH:mm:ss AP
hh:mm:ss ap
H:mm:ss AP
h:mm:ss ap
h:mm:ss
hh:mm:ss
The following applies:
Time symbol:
h
hh
H
HH
m
mm
s
ss
AP
Procedure
SINUMERIK Operate
Commissioning Manual, 10/2015, 6FC5397-3DP40-5BA3
Example Hour system
1:2:4 PM 24 hour system, with display of "AM" / "PM"
1:2:8 pm 12 hour system, with display of "am" / "pm"
13:02:08 PM 24 hour system, with display of "AM" / "PM"
01:02:09 pm 12 hour system, with display of "am" / "pm"
1:02:09 PM 24 hour system, with display of "AM" / "PM"
1:02:09 pm 12 hour system, with display of "am" / "pm"
13:02:09 24 hour system
13:12:04 24 hour system
Description of the entry
Single or double digit hour (0 - 23 or 1 - 12 for am/pm).
Double digit hour, with leading zero (00 - 23 or 01 - 12 for am/pm).
Single or double digit hour (0 - 23 for AM/PM).
Double digit hour, with leading zero (00 - 23 for AM/PM).
Single or double digit minute (0 - 59).
Double digit minute, with leading zero (00 - 59).
Single or double digit second (0 - 59).
Double digit second, with leading zero (00 - 59).
Display of the time of day:
1. Select the "Start-up" operating area.
2. Press the "HMI" softkey.
3. Press the "Date/Time" softkey.
The "Set Date and Time" window opens.
4. Select the required formats for the date and time with the <SELECT> key
in the "Format" field.
5. In the entry fields after "new" enter the actual date and time.
6. Confirm the entry with the "OK" softkey.
The new date and time details are transferred.
AM or am = before midday or
PM or pm = after midday
General settings
1.2 Set date/time
17