Siemens SINUMERIK 828D Commissioning Manual page 956

Fundamentals
3.1 Structure of configuration file
Note
Sequence
The specified sequence in the configuration file must be maintained.
Example:
//S (START)
....
//END
//M (.....)
DEF .....
LOAD
...
END_LOAD
UNLOAD
...
END_UNLOAD
...
//END
//S (...)
//END
Storage location for configuration files
The configuration files are located in the
correspondingly stored in the
directories.
Converting texts from other HMI applications
Procedure to convert a text file with code page coding to text-coding UTF-8:
1. Open the text file on a PG/PC in a text editor.
2. When saving, set the UTF-8 coding.
The read-in mechanism via code page code is still supported.
26
; Definition of the start softkey (optional)
; Definition of the dialog
; Definition of the variables
; Description of the blocks
; Definition of a softkey menu
[System user directory] /proj directory and also
[System add_on directory] and [System oem directory]
Programming Manual, 10/2015, 6FC5397-3DP40-5BA3
SINUMERIK Integrate Run MyScreens