Siemens SINUMERIK 828D Commissioning Manual page 31

3. To call the "Startup menu", press the following keys in succession:
Menu back key, HSK2 (horizontal softkey 2), VSK2 (vertical softkey 2)
Note
PPU with touch operation
To call the Startup menu during startup, there is an additional shortcut for all PPUs: "8" →
"2" → "8"
4. The "Startup menu" is displayed, "Normal startup" is the default setting.
Operating modes for startup
Selection
Normal startup
Reload saved user data
Install software update/backup
CNC commissioning
Commissioning Manual, 10/2015, 6FC5397-3DP40-5BA3
Function
The system carries out a normal startup.
The system loads the stored user data ("Save data" softkey) from
the system CompactFlash card.
An update is installed on the system CompactFlash card from the
user CompactFlash card or USB FlashDrive.
Scope of delivery and requirements
1.4 Starting up the control
17