Commissioning Process; Guide To The Documentation - Siemens SINUMERIK 828D Commissioning Manual

1.3

Commissioning process

1.3.1

Guide to the documentation

Sequence
The commissioning process described in the following table represents an efficient suggestion
that is also discussed in the SINUMERIK training. The tasks shown in square brackets apply
to the numbers of the steps described in the training documents. The sections contained in
the manual that provide supplementary information to the training documents are specified as
references with page numbers in the right-hand column.
Overview
<B060> System overview
<B002> Commissioning and service tools
Basic information
<B061> Menu structure
<B021> Access levels
Date and time
<B041> Parameterizing machine data
<B035> SINUMERIK Integrate Access MyMachine /P2P
Network configuration → Setting up drives
<B044> Checking and entering licenses
<B045> Network configuration → Setting up drives
<B007> Electronic logbook
<B017> Data management
Configuration and diagnostics
<B010> PPU connection diagnostics
● System overview
● Digital inputs/outputs
<B030> Digital inputs/outputs → terminal assignment
Handwheels and measuring inputs
<B051> Line Modules, Motor Modules
<B053> Diagnostics
● Drive system diagnostics
● Diagnostics and service → axes
<B008> PROFINET connection diagnostics:
● MCP 310C PN / MCP 483C PN
● MCP 310 USB / MCP 483 USB
● PP 72/48D PN and PP 72 / 48D 2/2A PN
CNC commissioning
Commissioning Manual, 10/2015, 6FC5397-3DP40-5BA3
Scope of delivery and requirements
"Commissioning CNC" (Page 9) Commissioning Manual
"Commissioning CNC" (Page 11) Commissioning Manual
---
"Commissioning CNC" (Page 37) Commissioning Manual
"Commissioning CNC" (Page 40) Commissioning Manual
"Commissioning CNC" (Page 77) Commissioning Manual
Online Help
Turning/Milling/Grinding/Universal Operating Manual
"Commissioning CNC" (Page 47) Commissioning Manual
Turning/Milling/Grinding/Universal Operating Manual
"Hardware and Software" Service Manual
"Commissioning CNC" Commissioning Manual
● Introduction and use of data classes (Page 29)
● Easy Archive (Page 333)
"PPU and Components" Manual
"Commissioning CNC" (Page 146) Commissioning Manual
SINAMICS S120 Device Manual
"SINUMERIK Operate" Commissioning Manual /828D_IH9/
"PPU and Components" Manual
1.3 Commissioning process
13