Gear Change Lights; Gear Change Light Modes; Setting Gear Change Light Limits - Triumph Speed Triple Handbook

Gear Change Lights

The gear change lights provide a visual
indication of when to change gear. The gear
change lights are all coloured blue.
2
3
4
1
chdo_1
1. Display screen
2. Gear change lights
3. Button A
4. Button B

Gear Change Light Modes

The gear change lights
programmable operating
described below:
• 3 LED mode: The first three lights
illuminate when the set limit is
reached, and remain illuminated
until the engine speed drops below
the set limit.
• 6 LED mode: All six lights illuminate
when the set limit is reached, and
remain illuminated until the engine
speed drops below the set limit.
• OFF mode: The gear change lights
are turned OFF.
General Information
• SE
progressively illuminate in 250 rpm
increments until the set limit is
reached. At the set limit all six lights
will be illuminated.

Setting Gear Change Light Limits

The gear change lights will not operate below
3,500 rpm to avoid the lights operating at
idle.
To change the gear change light modes, with
the motorcycle stationary and in neutral turn
the ignition to the ON position.
Press and release button 'A' until set up is
visible in the display screen then press
button 'B'.
Press and release button 'A' until SHIFt is
visible then press button 'B'. The current
mode will
corresponding
illuminate.
Press and release button 'A' until the desired
gear change light mode is visible then press
button 'B'. The display will scroll through in
the following order:
have four
• SE (Scale mode);
modes as
• 3 (3 LED mode);
• 6 (6 LED mode);
• OFF (Gear change lights off).
mode: The lights will
be displayed and the
gear change lights will
27