Cylinder Head Bolt Release Sequence; Inspection - Triumph Tiger Service Manual

3 CYLINDER HEAD & CAMSHAFT
1. Engine Mounting Bracket
2. Fixings
35. Progressively release the cylinder head bolts in the
order shown below.
7 2 4
6
Cylinder Head Bolt Release Sequence
36. Lightly tap the cylinder head with a rubber mallet to
break the seal of the gasket. Remove the cylinder
head and discard the head gasket.
37. Collect the cam chain rubbing blade from the
crankcase.
1
1. Cam Chain Rubbing Blade
3.22
38. Remove the cylinder liners as described in section
six of this manual.
Inspection
1. Thoroughly clean the surface of the head and check
for damage and pitting of the combustion
chambers.
2. Using a straight edge, check the cylinder head
gasket face for warp which could lead to gasket
failure. Replace the head if warped.
1. Straight Edge
2. Cylinder Head Gasket Face
3. Check the cam chain rubbing blade. Renew if worn
or damaged;
(
(
.
/