3.5.2.3 UTC Control
Click UTC to enter the UTC Control panel. On this panel, you can display the analog camera
OSD menu and configure the camera OSD settings.
Note: For EverFocus' PTZ cameras, only the UTC-supported PTZ cameras support the UTC
function.
To perform the UTC Control function:
1. Select a camera and then select UTC1 or UTC2 from the Protocol drop-down list.
2. Click the
button, the camera OSD menu will be displayed.
3. You can use the Up / Down / Left / Right buttons to select among the OSD menu items
and use
as the Enter button to enter the setup menu.
Select a channel
Click to enter the UTC control panel
Select a Protocol
Operation Keys
25
H.265 VANGUARD II Series