Ftp Schedule - EverFocus H.265 VANGUARD II Series User Manual

H.265 VANGUARD II Series

4.4.4.2 FTP Schedule

You can configure the FTP schedule on this page. The selected event recordings will be
uploaded to the FTP by the scheduled time. For example, if you set up Motion on Sunday
between 6-8am, the Motion recordings will be uploaded to FTP between 6-8am on Sunday.
Note that for the FTP Schedule function to work, you have to enable FTP Video Upload
function on the related alarm setup page (Motion, IO, Intelligent).
Channel: Select a channel to configure the FTP schedule individually.
Motion: Click the Motion button on the right-side and then move your mouse cursor over
the schedule time blocks. Click and drag on the schedule time blocks to draw the blocks with
yellow color, which will be applied with motion FTP upload function. To enable Motion alarm,
please refer to 4.1.6 Motion.
IO: Click the IO button on the right-side and then move your mouse cursor over the schedule
time blocks. Click and drag on the schedule time blocks to draw the blocks with red color,
which will be applied with IO FTP upload function. To enable IO alarm, refer to 4.3.2 IO.
Intelligent Analysis: Click the Intelligent Analysis button on the right-side and then move
your mouse cursor over the schedule time blocks. Click and drag on the schedule time blocks
to draw the blocks with blue color, which will be applied with Intelligent Analysis FTP upload
function. To enable Intelligent Analysis alarm, please refer to 4.3.3 Intelligent Alarm.
Copy: You can apply the same configurations from one channel to other channels. Select a
channel from the Source Channel drop-down list and then select the parameters you would
like to apply to other channels. Select the desired channels from the Target Channel field
and then click the Copy button.
Default: Click to apply the default setting.
Apply: Click to save the settings.
85