Sound Detection - EverFocus H.265 VANGUARD II Series User Manual

4.1.8.7 Sound Detection

This function is only available when the supported analog/IP cameras with sound detection
function are connected. For the supported cameras, please contact EverFocus
(ts@everfocus.com.tw).
To configure the Sound Detection settings:
1. Check the Switch checkbox to enable the function of the channel.
2. In the Rise field, select Enable to enable the Sound Rise detection. And then further set
up the Rise Sensitivity and Sound Intensity.
3. In the Decline field, select Enable to enable the Sound Decline detection. And then
further set up the Decline Sensitivity.
4. If you want to enable recording when sound detection alarm is triggered, in the Light
Schedule field, click
time blocks to draw the blocks with blue color, which will be applied with Sound Detection.
To deselect the blocks, click and drag on the blue blocks to select again. Click Save to save
the settings.
5. Click the Apply button to save the settings.
6. To further set up the alarm notifications, click the Alarm button to enter the Alarm setup
page. Please refer to 4.3.3 Intelligent Alarm.
to set up the recording schedule. Click and drag on the schedule
54
H.265 VANGUARD II Series