4.1.8.2 Line Crossing
When objects (people, vehicle or other objects) cross a pre-defined line, the Line Crossing
Detection event will be triggered. You can configure some event actions like event recording,
Email alert or pop-up full screen when an event is triggered.
To configure the Line Crossing settings:
1. Check the Switch checkbox to enable the function of the channel.
2. Select a Sensitivity value from the drop-down list. The larger the value, the higher the
sensitivity.
3. In the Setup field, click
Configuring Line Crossing Detection Lines for more details.
4. Click the Apply button to save the settings.
5. To further set up the alarm notifications, click the Alarm button to enter the Alarm setup
page. Please refer to 4.3.3 Intelligent Alarm.
6. If you want to activate the intelligent recording function, you need to configure the
recording schedule. Please refer to 4.1.8.9 Record Schedule.
to set up the detection lines. Please refer to 4.1.8.2.1
42
H.265 VANGUARD II Series