Forget Your Password; Camera Selection - EverFocus Paragon960 User Manual

Using the front panel buttons: Use the Jog / Shuttle to select a user name form the User
drop-down list and press Enter. Use the Jog / Shuttle to select Password field and then
press the Enter button to bring up the on-screen keyboard. Use the Jog / Shuttle to
highlight each character and then press the Enter button to input the selected characters.
When finished, highlight Enter on the On-Screen Keyboard, and press the Enter button
to confirm the User Name / Password.
3. Click Login or use the Jog / Shuttle to select Login and press Enter button on the front
panel to log in the DVR.
3.3.2

Forget Your Password

1. If you forget your password, please email the Serial Number of the DVR to
techsupport@everfocus.com, and then EverFocus will send you a verification code.
2. Input this verification code in the Password field of the Login window within 24 hours,
and check the Verification Mode box.
3. Click Login to log in the DVR.
Note: This verification code is effective within 24 hours only, so please set up a new
password in the System Setting page (refer to 6.9.4 User Management).
3.3.3

Camera Selection

You can control each camera individually by selecting that camera. To select a camera, follow
the instructions below.
Using a mouse: Click a camera on the screen, and the selected camera will be highlighted with
a red frame. All cameras will be selected when you scrolling the mouse up / down between
the first and the last channel.
Using the front panel buttons: Turn the Jog / Shuttle wheel clockwise or counterclockwise to
select through the camera. The selected camera will be highlighted with a red frame. All
cameras will be selected when you turn the Shuttle wheel between the first and the last
cameras.
Figure 3-5
41
PARAGON960 x4 32CH