Acp 106 Style Configuration Example - Extron electronics DMP 128 FlexPlus User Manual

14. From the panel graphic on the left side of the dialog box, select the
figure 166,
15.
From the
Figure 166.
The ACP 100 panel is now fully configured. From this point, either:
• Add additional ACP panel configurations.
Save the ACP panel configuration to the DSP Configurator configuration file (see
•
and Pushing ACP Configurations
• Push the configurations to the DMP 128 FlexPlus (see
Configurations

ACP 106 Style Configuration Example

1. From the DMP 128 FlexPlus main workspace in DSP Configurator, select
Tools > Configure ACP Panels
2. Select an empty tab from the top of the dialog box to build a new configuration (see
figure 167,
3. From the
configured. The
ACP 106.
4. From the
set on the ACP 106 DIP switch assembly (see the ACP 106 D Setup Guide or the ACP
106 EU/MK Setup Guide for information on setting the bus ID #).
Figure 167.
5. In the panel graphic on the left side of the
below).
1
drop-down (
Control Type
Rotary Volume Knob Configuration
on page 108).
. The
below).
1
drop-down (
ACP Panel Type
dialog box populates with a graphic of the selected
Configure ACPs
drop-down ( ), select the ID number that corresponds with the bus ID
3
ID #
Selecting ACP 106 for Configuration
), choose
2 Follow Selector
on page 108).
Saving and Pushing ACP
dialog box opens.
Configure ACPs
), select the ACP 106 model to be
2
dialog box, the mute
Configure ACPs
DMP 128 FlexPlus • Audio Control Panels
knob (see
VOL
.
Saving
105