Configuring Players - Extron electronics DMP 128 FlexPlus User Manual

Configuring Players

To upload an audio file:
1. Enter Live mode to connect to a DMP 128 FlexPlus (see
page 17).
2. Click
Tools > Configure Players
3. From the
figure
4. From the
audio file and select it (see figure 131,
NOTE: File names containing spaces are not accepted.
5. Click
Open
Figure 131.
6. A
Loading...
workspace. When the file is loaded successfully, the field reads
Successfully!
Figure 132.
7. Click
OK
Figure 133.
dialog box, click
Configure Players
131, on the previous page).
2
Select Audio file to load to device
( ).
2
Selecting an Audio File to Upload
status bar appears in the menu status field at the top of the main
Loading Bar and File Uploaded Successfully
in the
Upload Complete
Upload Complete Dialog Box
Live and Emulate Panel
.
Add File to Device
dialog box, locate the desired
below).
1
dialog box.
DMP 128 FlexPlus • Configuration Tools
on
(see
File Loaded
76