Dmp 128 Flexplus Voip Web - Extron electronics DMP 128 FlexPlus User Manual

6
7
DMP 128 FlexPlus VoIP Web Page
Accessing the Embedded VoIP Web Page
1.
2.
3.
Date/Time Settings Panel — Displays date, time, and time zone information for the
device. Click to sync date and time information on the device with the date
Sync to PC
and time on the host computer. Alternatively, click
dialog box which allows the user to set date, time, and time zone
and Time Settings
information.
Figure 195. Date and Time Settings Dialog Box
Passwords Panel — Click the
dialog box which allows users to set admin and user passwords. Enter and
Passwords
confirm a password, then click
NOTES:
•
An administrator password must be applied before a user password can be
applied.
• The factory configured password for this device has been set to the device
serial number. Passwords are case sensitive. Performing a Reset to Factory
Defaults reset sets the password to extron.
Figure 196. Passwords Dialog Box
From a web browser, enter the device IP address into the address field followed by
.
/www/voip.html
NOTE: If the local system administrators have not changed the IP address, and
the device has not been assigned an IP address via DHCP, the default address is
.
192.168.254.254
Press < >.
Enter
If a username and password have been set to access the basic DMP 128 FlexPlus web
page, the same username and password are required to access the VoIP web page.
Set Manually
button in the
Set Passwords
to apply the password.
Apply
DMP 128 FlexPlus • Web Pages
to open the
Date
panel to open the
169