Output Processing - Extron electronics DMP 128 FlexPlus User Manual

Figure 96.
1
2
3
4
5

Output Processing

The output processing chain in DSP Configurator is represented by a string of blocks (see
figure 98 below). Each block contains a specific processor or type of processor. Each output
contains the following processor chain:
1.
2.
3.
4.
5.
Figure 98.
Output Building Blocks Dialog Box
Output Building Blocks List — Contains building blocks for output channels.
Add a Building Block Button — Allows users to create custom building blocks,
saving the currently applied gain and processor settings on the selected channel. Click
the icon to open the
Add a Building Block
the new custom building block and choose the folder to save the block to an existing
folder, or create a new folder.
Figure 97. Add a Building Block Dialog Box
Delete a Building Block Button — Deletes the currently selected building block or
building block folder. If default building blocks are deleted, they can be restored from the
Organize Building Blocks
New Folder Button —Creates a new folder or sub-folder.
Building Blocks Help Button — Opens the
DSP Configurator Help file. This topic contains more information on the different types
of building blocks for inputs and outputs.
Output Trim Block
Output Delay Block
Output Filter Block
Output Dynamics Block
Output Attenuation Block
Output Processing Chain
Output Building Blocks List
1
Add a Building Block Button
2
Delete a Building Block Button
3
New Folder Button
4
Building Blocks Help Button
5
dialog box. This allows users to name
dialog box.
Building Blocks
DMP 128 FlexPlus • DSP Configurator Software
topic of the
58