Extron electronics DMP 128 FlexPlus User Manual page 115

button labeled is highlighted (yellow). When a button is highlighted, it is selected for
OFF
configuration.
6.
From the
Control Type
• for the button to unmute all output.
Fixed OFF
•
Follow Selector
button.
If was chosen:
Fixed
a. From the
Mute Master
output channels.
If was chosen, the button is fully configured.
Follow Selector
7.
From the panel graphic on the left side of the dialog box, select the mute button labeled
( ).
6
ON
8. From the
Control Type
for the button to mute all output.
•
Fixed ON
•
Follow Selector
NOTE: The same control type chosen for the
the mute button.
ON
If was chosen:
Fixed
a. From the
Mute Master
output channels.
If was chosen, the button is fully configured.
Follow Selector
Figure 168. Configuring Mute Off and Mute On Buttons
9. From the panel graphic on the left side of the dialog box, select the volume button
drop-down (see figure 168,
for the button to unmute a group defined by a selector
OFF
drop-down ( ), select the mute group containing all
5
drop-down ( ), select either:
7
for the button to mute a group defined by a selector button.
ON
OFF
drop-down ( ), select the mute group containing all
8
DMP 128 FlexPlus • Audio Control Panels
below), select either:
4
mute button should be chosen for
106