Managing Devices In Device Manager - Extron electronics DMP 128 FlexPlus User Manual

Managing Devices in Device Manager

To add a device:
1. Click
Tools > Device Manager
2. Click the
Figure 142.
3. From the DSP Configurator splash screen drop-down, select the device to be added to
Device Manager (see figure 143,
to device...
DSP Configurator performs a pull of the newly connected device configuration.
4. Click
OK
Figure 143.
To arrange devices into a folder:
1. From the
on the following page).
2. Enter a name for the folder. The text for the folder name is automatically highlighted and
ready to be edited (
NOTE: Folders can be renamed later by clicking twice on the folder name and
editing the text.
3. Press
4. Click and drag devices over the folder name and release to insert the devices into a
folder (
to open the
button (see figure 142,
Add Device
Adding a Device
2
dialog box and directly connect with a device. When connecting directly,
( ).
3
Selecting a Device to be Added
dialog box, click the
Device Manager
).
2
.
<Enter>
).
3
dialog box.
Device Manager
below).
1
below). Select
Connect...
button (see figure 144,
New Folder
DMP 128 FlexPlus • Configuration Tools
to open the
Connect
1
86