Extron electronics DMP 128 FlexPlus User Manual page 80

To edit an existing group:
1. Select
Tools > Configure Groups
figure 124 below).
2. From the
Select Group
3. From the
Select Control Type
4. Choose which gain stage to edit.
5. From the
Available Group Members
be members of the group.
6. Click ( ).
4
Apply
7. From the
Confirm Group Details
be edited ( ).
5
8. Click to confirm the group details (
OK
9. When the
Overwrite Group
to the group.
To edit only a group name or group number:
1.
Choose the group from the
2. Click (
7
Change Name
3. From the
Change Group Name
into the respective fields (
4. Click ( ).
6
OK
Figure 124. Editing a Group
to open the
Configure Groups
drop-down ( ), select an existing group to edit.
1
panel ( ), expand a control type.
2
panel ( ), select or deselect channels that will
3
dialog box, the group number and group name can
).
6
dialog box opens, click
drop-down (
Select Group
).
dialog box, enter the new group number or group name
).
5
DMP 128 FlexPlus • Configuration Tools
dialog box (see
to confirm the changes made
OK
).
1
71