Extron electronics DMP 128 FlexPlus User Manual page 121

5. The
Dante Controller - Device View
configured from the
(Select a Dante Device...)
below).
Figure 172. Device View and Select a Dante Device Drop-Down
NOTES:
• If there are multiple DMP 128 FlexPlus devices connected to the network that
have not been renamed, obtain the Dante interface media access code (MAC)
address of the desired device from the white label on the rear panel of the
device in order to identify it in Dante Controller.
• There are multiple MAC addresses listed on the rear panel of a DMP 128
FlexPlus, one for the LAN port and one for the Dante interface. The Dante
interface MAC address is listed beneath the LAN port MAC address.
The dialog populates with the selected DMP 128 FlexPlus information.
Device View
Figure 173. Populated Device View Dialog Box
6. Click the
Device Config
page.
7.
In the
Rename Device
spaces are allowed in the name. Names should be significant identifiers. For example,
enter
DMP128FlexPlus-MainRack
8. Click ( ). A confirmation prompt opens.
Apply 3
Figure 174. Device Config Dialog, Rename Device
dialog opens. Select the device being
tab (see figure 174, below) to open the
1
panel, enter the new name of the device in the text field. No
( ).
2
DMP 128 FlexPlus • Dante Controller
drop-down list (see figure 172,
Device Config
1
112