Expansion Output Processing
The expansion output processing chain in DSP Configurator is represented by a string
of blocks (see figure 113 below). Each block contains a specific processor or type of
processor. Each expansion output contains the following processor chain:
1.
2.
3.
4.
5.
Figure 113.
Expansion Output Trim Block
Each expansion output contains a trim block. This block functions the same as the output
trim block (see
expansion output trim block).
Expansion Output Delay Block
Each expansion output contains a delay block. This block functions the same as the
mic/line input delay block (see
configuring the expansion output delay block).
Expansion Output Filter Block
Each expansion output contains a filter block. This block functions the same as the
mic/line input filter block, except that there are 10 slots for filters (see
page 24 for information on configuring expansion output filters).
Expansion Output Dynamics Block
Each expansion output contains a dynamics block. This block functions the same as the
mic/line input dynamics blocks (see
on configuring the expansion output dynamic filter).
Expansion Output Trim Block
Expansion Output Delay Block
Expansion Output Filter Block
Expansion Output Dynamics Block
Expansion Output Attenuation Block
Expansion Output Processing Chain
Output Trim Block
Input Delay Block
on page 59 for information on configuring the
on page 35 for information on
Input Dynamics Blocks
on page 30 for information
DMP 128 FlexPlus • DSP Configurator Software
Input Filter Block
on
64