Macros - Extron electronics DMP 128 FlexPlus User Manual

Macros

Macros are sets of actions that can affect the local DMP 128 FlexPlus and other Extron
products on the same TCP/IP network. They can be configured in Emulate or Live mode
via an Ethernet connection only, and they can be saved to a configuration file or pushed to
DMP 128 FlexPlus internal memory. Macros are comprised of up to 32 actions that occur in
sequence to quickly configure a system for specific applications.
Figure 136.
1
2
3
4
5
6
7
8
9
¢
Configure Macros Dialog Box
Select Macro Drop-Down — Select an empty macro slot to configure or select an
existing macro to edit from this drop-down menu.
Change Name Button — Click this button to enter a new name for a previously
configured macro. Press <
Enter
Macro Configuration Form — Up to 32 actions can be configured in this form. When
one action is configured, a new line appears to configure the next action in the macro.
Delete Current Macro Button — Deletes the macro currently selected from the
drop-down.
Select Macro
Clone Macro Button — Clones the currently selected macro to a new macro slot.
Run Macro Button — Runs the macro currently selected from
drop-down, performing all of the configured actions in sequential order. This is only
available when connected to a DMP 128 FlexPlus in Live mode via the LAN or VoIP 1
port.
Edit Remote Destinations Button — Opens the dialog box to edit data for remote
devices being configured by the actions in a macro. Remote devices in the network
can also be added from this dialog box (see the
DSP Configurator Help file). This is only available when connected in Live mode.
Push Macros to Device Button — Pushes all macros to a connected
DMP 128 FlexPlus. Once the macros are on the device, they can be run by control
systems or DSP Configurator. This button is only available when connected Live to a
DMP 128 FlexPlus (see Live and Emulate Panel
Power-on Macro Drop-Down — Select an existing macro to run whenever the
DMP 128 FlexPlus is powered on.
Close Button — Closes the
have been created or edited. Actions that have not been completely configured show a
symbol to the left of the
showing the symbol are not saved when the dialog box is closed.
> to confirm the macro name change.
Configure Macros
on page 17).
dialog box, retaining macros that
Configure Macros
field in the macro configuration form. Actions
Destination
DMP 128 FlexPlus • Configuration Tools
Select Macro
topic in the
78