Extron electronics DMP 128 FlexPlus User Manual page 182

4. Select the
QoS DSCP
automatically configure layer 3 QoS.
NOTE: VLAN ID, QoS PCP, and QoS DSCP values read from the network and
applied to the DMP 128 FlexPlus overwrite any manually specified values.
5. Select the
Inventory
number, and firmware details to the network switch.
6. Select the
Civic Location
panel. This is useful when logging the physical location of the
Civic Location
DMP 128 FlexPlus for network management purposes.
Apply Button — Click the
3
the device.
Transport
Transport Protocol Configuration
1
Use Secure RTP (AES CTR) Checkbox
2
TLS Mode Drop-Down
3
Local Mode Drop-Down
4
Figure 200. VoIP Network Transport Page
Transport Protocol Configuration — Select
1
protocols.
NOTE: When is selected, the listening port changes from
TLS
listening port can be manually adjusted.
Use Secure RTP (AES CTR) Checkbox — Check this box to encrypt RTP audio
2
streams using the AES CTR cipher.
checkbox to read DSCP values from the network and
checkbox to send the DMP 128 FlexPlus model number, part
checkbox to send the location details entered into the
button to commit Qos and LLDP-MED changes to
Apply
Local Cert
5
Private Key
6
Server Certs
7
Apply Button
8
(default),
UDP
DMP 128 FlexPlus • Web Pages
, or transport
TCP TLS
to . The
5060 5061
173