Table of Contents
Advertisement
Installation and
Configuration
This section describes the installation, and configuration of the EDID 101H 4K PLUS, including:
•
•
•
•
•
Installation Overview
To install the EDID 101H 4K PLUS:
1.
TIP:
after mounting or installation
2.
3.
4.
5.
6.
7.
The video source reads the EDID information from the EDID 101H 4K PLUS.
Installation Overview
Front Panel Features
Rear Panel Features and Cabling
HDMI Connector LockIt lacing Bracket
EDID Configuration
Mount the EDID 101H 4K PLUS (see
Do not connect power to the source, the display, or the EDID 101H 4K PLUS at this time.
Configure the EDID 101H 4K PLUS prior to the installation if access is restricted
Configure the EDID 101H 4K PLUS (see
Connect an HDMI cable from the source to the input connector (see
and Cabling
on page 5).
B
Connect an HDMI cable from the output connector (
system input.
Connect power and turn on the video display or distribution system.
Apply power to the EDID 101H 4K PLUS (
Turn on the video source.
Mounting the EDID 101H 4K PLUS
EDID Configuration
on page 7).
) to the video display or distribution
C
). The LED lightsl turn on.
A
EDID 101H 4K PLUS • Installation and Operation
on page 20).
Rear Panel Features
3
Advertisement
Table of Contents
