Input Automix Block - Extron electronics DMP 128 FlexPlus User Manual

Adaptive Gain
After inserting an adaptive gain processor, double-click the
Adaptive Gain
Figure 62.
Adaptive Gain Source Configuration — In the
1
inputs that will have gain added by the adaptive gain processor. In the
column, enter the maximum amount of gain that will be applied to each channel
(dB)
selected in the
channel when signal exceeds the threshold on the adaptive gain trigger channel.
NOTE: For every 1 dB of signal beyond the level set in the
of gain will be added to the channels selected in the
occurs until the maximum gain set in the
Adaptive Gain Parameter Settings — Contains controls for
2
,
Time
Adaptive Gain Operation Help Button — Opens the
3
topic of the DSP Configurator Help file for further assistance in adaptive gain
configuration.

Input Automix Block

Double-click the
the automix processor into the block.
Figure 63.
Once the automix processor is inserted into the
open the
Automix
dialog box.
Adaptive Gain Dialog Box
column. When a box is checked, gain is applied to that
Add Gain To
, and
Hold Time Release Time
block to open a drop-down menu. Select
Automix
Automix Block and Drop-Down
dialog box.
icon to open the
AG
Adaptive Gain Source Configuration
1
Adaptive Gain Parameter Settings
2
Adaptive Gain Operation Help Button
3
Add Gain To
Add Gain To
Max Gain (dB)
.
Adaptive Gain Operation
block, double-click the block to
Automix
DMP 128 FlexPlus • DSP Configurator Software
column, check the
Max Gain
field, 1 dB
Threshold
column. This
field has been applied.
,
Threshold Attack
to insert
Auto-mixer
38