Edit; View - Extron electronics DMP 128 FlexPlus User Manual

Exit — Closes DSP Configurator. If the current configuration has not been saved, the
9
dialog box opens and prompts the user to save the current configuration before
Save
closing the software. Click
saving. Click

Edit

Figure 13.
Cut — Removes the configuration of selected elements in the workspace to be pasted
1
to other elements.
Copy — Copies the configuration of selected elements in the workspace to be pasted
2
to other elements.
Paste — Applies the cut or copied configuration of elements to the selected elements
3
in the workspace.

View

Figure 14.
Meter Bridge — Opens a meter bridge to view input and output activity. The meter
1
bridge is a floating window, allowing use of the DSP Configurator workspace while
simultaneously monitoring input and output activity.
NOTE: The meter bridge is only available in Live mode with a TCP/IP connection.
Re-enable All Dialogs — This option re-enables all dialog boxes that no longer
2
appear based on user selection (certain dialog boxes that appear are user-defeatable by
selecting a checkbox that reads
Group Controls — Opens the
3
controls and add new groups.
AT Meters — Opens a dialog box to select AT devices on the network. Double-click a
4
device to open a meter bridge dialog box that displays AT transmit (Tx) and receive (Rx)
channel levels for that device. The dialog box is a floating window, allowing use of the
main workspace while simultaneously monitoring AT levels.
Show All Channels — Individual channels can be hidden by user selection. This
5
provides options for the user to select which input and output groups are visible in the
main workspace.
to save the file. Click
Yes
to return to the main workspace and keep the software running.
Cancel
Edit Menu
View Menu
Do Not Show This Dialog Again
Group Controls
DMP 128 FlexPlus • DSP Configurator Software
to exit the application without
No
).
dialog box to access existing group
13