Extron electronics DMP 128 FlexPlus User Manual page 41

Compressor
Figure 53. Compressor Dialog Box
Compressor Channel Name — This name changes to match the default or user
1
defined input name.
Compressor Graph — Graphically displays compressor parameter settings.
2
Parameters can also be adjusted using this graph. Click and drag the dot within the
green area of the graph to adjust the compressor
outside the green box to adjust the compressor
Compressor Parameter List and Control — Lists all configurable parameters for
3
the compressor. Text fields are available to adjust
, and
Hold Time Release Time
, and
Hold Time Release Time
< > keys to adjust the respective parameter in 1 ms steps. Select the
Right Arrow
checkbox to provide a more natural implementation of compression when the
Knee
signal reaches the threshold.
Bypass Button — Bypasses the compressor. When the button is red, bypass is
4
enabled.
Set Defaults Button — Resets all compressor parameters to their default values. To
5
view individual parameter default values, see the DSP Configurator Help file by clicking
the button (
Dynamics Help
OK Button — Confirms changes made to the contained parameters and closes the
6
dialog box.
Compressor
Cancel Button — Reverts any changes made to the contained parameters back to
7
their states when the current instance of the
closes the dialog box.
Dynamics Help Button — Opens the
8
DSP Configurator Help file for further assistance in operating dynamics processors.
Compressor Channel Name
1
Compressor Graph
2
Compressor Parameter List and Control
3
Bypass Button
4
Set Defaults Button
5
OK Button
6
Cancel Button
7
Dynamics Help Button
8
Threshold
.
Ratio
Threshold
. Click and drag sliders to adjust
. Click a slider once and use the <
) to open the
8 About Dynamics
Compressor
Dynamics Operation
DMP 128 FlexPlus • DSP Configurator Software
. Click and drag the dot
, , ,
Ratio Attack Time
,
Attack Time
> and
Left Arrow
Soft
topic.
dialog box was opened and
topic of the
32