Receiver and Transmitter Names
In addition to renaming a device, individual transmitter and receiver channels can be
renamed in Dante Controller. Rename transmitter and receiver channels to reflect the
location of the device or the purpose of the transmitter or receiver. Ensure transmitter and
receiver channels are renamed before making audio connections between devices. Refer to
Renaming a Receiver or Transmitter
Dante Controller Naming Conventions
Device names follow Domain Name System (DNS) hostname rules. Legal characters are
•
,
A-Z
a-z
hyphen (
•
Dante Tx and Rx channel names (also known as labels) can be up to 31 characters in
length. Label names are not case-sensitive. For example, "
out-1
supported.
•
Tx and Rx channel labels can use any character except equals (
Tx and Rx channel labels must be unique on a device but do not need to be unique on
•
the network.
Renaming the DMP 128 FlexPlus in Dante Controller
NOTE: Dante device naming can also be done via DSP Configurator (see
on page 95).
1.
Ensure that the control computer and a single DMP 128 FlexPlus are connected to the
same network.
2.
From the control computer
All Programs > Audinate > Dante Controller > Dante Controller
3.
The
Dante Controller - Network View
network are discovered and listed.
4.
From the
figure 171 below).
Figure 171.
,
, and hyphen (
). Names must begin with a letter and cannot end with a
0-9
-
).
-
" are recognized as the same name. Unicode and non-roman characters are not
Start
menu, select
Device
Device View
Opening Device View
on page 113 for renaming procedure.
ANALOG OUT-1
menu select:
screen opens. All Dante devices on the
or press <
Ctrl+D
DMP 128 FlexPlus • Dante Controller
" and "
analog
), period (
), or
.
=
.
@
Dante Device
> on the keyboard (see
111