Extron electronics DMP 128 FlexPlus User Manual page 40

AGC (Automatic Gain Control)
Figure 52. AGC Dialog Box
Dynamics Channel Name — This name changes to match the default or user defined
1
input name.
AGC Graph — Graphically displays AGC parameter settings. Parameters can also
2
be adjusted using this graph. Click and drag the yellow lines to adjust the
parameter. Click and drag the bottom dot to adjust the
drag the middle dot to adjust the
to adjust the parameter.
Target
AGC Parameters List and Control — Provides text boxes to adjust all AGC
3
parameters.
Attack Time
adjust their respective parameters. Click a slider once and use the <
< > keys to adjust the respective parameter in 1 ms steps.
Right Arrow
Bypass Button — Bypasses the AGC processor. When the button is red, bypass is
4
enabled.
Set Defaults Button — Resets all AGC parameters to their default values. To view
5
individual parameter default values, see the DSP Configurator Help file by clicking the
button (
Dynamics Help
OK Button — Confirms changes made to the contained parameters and closes the
6
dialog box.
AGC
Cancel Button — Reverts any changes made to the contained parameters back to
7
their states when the current instance of the
dialog box.
Dynamics Help Button — Opens the
8
DSP Configurator Help file for further assistance in operating dynamics processors.
Dynamics Channel Name
1
AGC Graph
2
AGC Parameters List and Control
3
Bypass Button
4
Set Defaults Button
5
OK Button
6
Cancel Button
7
Dynamics Help Button
8
parameter. Click and drag the top dot
Maximum Gain
, , and
Hold Time Release Time
) and opening the
8
About Dynamics
dialog box was opened and closes the
AGC
Dynamics Operation
DMP 128 FlexPlus • DSP Configurator Software
Window
parameter. Click and
Threshold
also have sliders that
> and
Left Arrow
topic.
topic of the
31