Expansion Outputs; Naming An Expansion Output - Extron electronics DMP 128 FlexPlus User Manual

Expansion Outputs

Sixteen outputs are available in the
processing capabilities and route audio to the rear panel EXP port when another EXP device
is connected. These channels can also be transmitted to the Dante network.
Figure 109.

Naming an Expansion Output

1.
2.
3.
Expansion Outputs Panel
Click the expansion output name field.
Figure 110. Expansion Output Name Field
Delete the text and type the desired expansion output name.
Figure 111. New Expansion Output Name
Press the < > key or navigate away from the field to confirm and apply the new
Enter
output name. Press the <
Down Arrow
Figure 112. Renamed Expansion Output
NOTE: Follow the same procedure to edit an Expansion output name.
panel. These outputs contain DSP
Expansion Outputs
> to navigate to and highlight the next name field.
DMP 128 FlexPlus • DSP Configurator Software 63