Ip Settings; Passwords - Extron electronics DMP 128 FlexPlus User Manual

IP Settings

The
IP Settings
subnet mask, and DHCP status of the unit. The checkbox to the left of each parameter
must be checked before any changes can be made to that parameter. Click
the changes.
NOTES:
• Changing DHCP from On to Off resets the IP address to the factory default
(192.168.254.254).
• These settings apply to the port marked LAN (non-V model) or LAN 1 (V-model).
Figure 153.

Passwords

The
Passwords
administrator password must be created in order to create a user password. The checkbox
to the left of the password type (Admin or User) must be checked before creating or editing
passwords. Click
NOTES:
• Passwords only apply to IP connections and can be up to 12 characters in
length.
•
The factory configured password for this device has been set to the device
serial number. Passwords are case sensitive.
Figure 154.
tab allows the user to view and edit the IP address, gateway IP address,
IP Settings Tab
tab allows the user to create or edit user and administrator passwords. An
to save the changes.
Apply
Passwords Tab
DMP 128 FlexPlus • Configuration Tools
to save
Apply
93