Phone Dialer - Extron electronics DMP 128 FlexPlus User Manual

Phone Dialer

The
testing. Click
NOTES:
Figure 161.
1
2
3
4
5
6
7
8
dialog box is used for DMP 128 FlexPlus VoIP line configuration and
Phone Dialer
Tools>Phone Dialer
• DSP Configurator must be connected Live to a DMP 128 FlexPlus V-model in order
for the dialog to be opened.
Phone Dialer
• VoIP lines must be registered with the call server via the DMP 128 FlexPlus VoIP
web page (see DMP 128 FlexPlus VoIP Web Page
Phone Dialer Dialog Box
Selected Line Information — Displays the line number, display name, extension
number, and registration status of the selected line.
Appearance Window — Displays line appearances configured in the
DMP 128 FlexPlus, line extension, call status, and call duration. Appearances must be
selected to place or receive calls on a specific appearance.
Line Selection Buttons — Click these buttons to select a line and make calls or
display corresponding line information. When a call is incoming on a specific line, the
corresponding button flashes red.
New Call Button — Click this button after selecting a line and appearance to dial a
number using the dialer keypad.
Hold Button — Click this button during a call to put the call on hold. Click it again to
take a call off hold.
Number Field — Displays the number dialed with the dialer keypad. Alternatively, click
this field and use the keyboard to dial a number.
Dialer Keypad — Contains software buttons for dialing when not in an active call and
sending DTMF signals to the far end while in an active call. The green "off hook" button
places a call after a number is dialed. The red "on hook" button ends a call on the
selected line and appearance. The
Auto Answer Configuration — Contains a checkbox and
Select the checkbox to enable auto answer on all appearances of the selected line
(unchecked by default). Use the
seconds before the line auto answers.
to open the
Phone Dialer
on page 166).
Selected Line Information
1
Appearance Window
2
Line Selection Buttons
3
New Call Button
4
Hold Button
5
Number Field
6
Dialer Keypad
7
Auto Answer Configuration
8
button clears the number field.
Clear
field to enter the amount of time in
Ring Duration
DMP 128 FlexPlus • Configuration Tools
dialog box.
field.
Ring Duration
98