Aux Input Filter Block - Extron electronics DMP 128 FlexPlus User Manual

Figure 75.
Input Name — This name changes to match the default or user defined Aux input
1
name.
Aux Input Gain Fader — Click and drag the gain fader to provide up to 24 dB of
2
gain or 18 dB of attenuation in 1 dB steps. Click the fader and use the <
<
Down Arrow
Aux Input Gain Text Box — Enter a gain or attenuation value in 0.1 dB steps.
3
Polarity Button — Click this button to invert the signal polarity of the selected Aux
4
input. When the button displays the black
normal. When the button displays the black
inverted.
Mute Button — Mutes signal at the Aux input stage, preventing it from going any
5
further in the signal processing chain.
OK Button — Confirms changes made to the contained parameters and closes the
6
Aux Input
Cancel Button — Reverts any changes made to the contained parameters back to
7
their states when the current instance of the
closes the dialog box.
Aux Input Help Button — Opens the
8
file for further assistance in configuring Aux input sources.

Aux Input Filter Block

One filter block is available for each Aux input channel. This filter block functions the same
as the mic/line input filter block (see
configuring the Aux input filter block).
Aux Input Name
1
Aux Input Gain Fader
2
Aux Input Gain Text Box
3
Polarity Button
4
Mute Button
5
OK Button
6
Cancel Button
7
Aux Input Help Button
8
Aux Input Gain Dialog Box
> keys to adjust the fader up or down in 1 dB steps.
dialog box.
Input Filter Block
DMP 128 FlexPlus • DSP Configurator Software
symbol on a gray field ( ), the polarity is
+
symbol on a yellow field ( ), the polarity is
-
dialog box was opened and
Aux Input
topic of the DSP Configurator Help
Aux Input
on page 24 for information on
> or
Up Arrow
44