Extron electronics DMP 128 FlexPlus User Manual page 83

4. From the
Digital Out 1 Acting upon
macro affected by the mode.
Figure 129. Selecting Digital Out 1 Acting Upon
5.
Repeat steps 1 through 6 for additional Digital I/O configurations.
6. Click to close the
Close
7. To save the Digital I/O configuration, click
a location to save the configuration file.
To push the Digital I/O configuration to a DMP 128 FlexPlus:
1. Connect to a DMP 128 FlexPlus in Live mode (see
page 17) and follow the the steps in
Changes made in the
Configure Digital I/O
applied directly to the DMP 128 FlexPlus.
-or-
1. Follow the follow the steps in
mode.
2. Connect to a DMP 128 FlexPlus in Live mode and perform a configuration file push (see
Live and Emulate Panel
drop-down, select an input, group, preset, or
Configure Digital I/O
File > Save
Live and Emulate Panel
Configuring Digital I/O
dialog box when connected Live are
Configuring Digital I/O
on page 17).
DMP 128 FlexPlus • Configuration Tools
dialog box.
or press < > and choose
Ctrl+S
on
on page 73.
on page 73 while in Emulate
74