Virtual Return Filter Block; Virtual Return Dynamics Block; Virtual Return Delay Block; Virtual Return Pre-Mixer Gain Block - Extron electronics DMP 128 FlexPlus User Manual

Virtual Return Filter Block

One filter block is available for each virtual return channel. This filter block functions the
same as the mic/line input filter block (see
on configuring the virtual return filter block).

Virtual Return Dynamics Block

One dynamics block is available for each virtual return channel. This block functions the
same as the mic/line input dynamics block (see
information on configuring the virtual return dynamics block).

Virtual Return Delay Block

One delay block is available for each virtual return channel. This block functions the same
as the mic/line input delay block (see
configuring the virtual return delay block).

Virtual Return Pre-Mixer Gain Block

The virtual return pre-mixer gain block functions the same as the mic/line input pre-mixer
gain block (see
the virtual return pre-mixer gain block).

Expansion and AT Inputs

The expansion inputs receive signal via the rear panel EXP port when connected with
another EXP enabled device. AT inputs receive signal from the Dante network when
connected to an audio network (AT models only). The DMP 128 FlexPlus can receive 16
channels of audio via the EXP port and 48 channels of audio via Dante (AT model only).
On a DMP 128 FlexPlus model, AT inputs 33 through 48 can be used for the EXP inputs
allowing use of the Dante network and the EXP port simultaneously (see
page 96).

Renaming an Expansion or AT Input

NOTES:
1.
2.
Input Pre-Mixer Gain Block
• AT inputs can only be renamed when connected in Live mode. Default input names
appear in Emulate mode.
• Renaming an AT input in DSP Configurator affects the receiver name in
Dante Controller. Alternatively, renaming a receiver channel name in Dante Controller
affects the name displayed in DSP Configurator (see
Transmitter
on page 113).
Click the expansion or AT input name field.
Figure 84. Expansion Input Name Field
Delete or highlight the text and type the desired name.
Figure 85. New Expansion Input Name
Input Filter Block on page 24 for information
Input Dynamics Blocks
Input Delay Block on page 35 for information on
on page 40 for information on configuring
Renaming a Receiver or
DMP 128 FlexPlus • DSP Configurator Software
on page 30 for
Expansion Bus on
51