Extron electronics DMP 128 FlexPlus User Manual page 27

2. Connect to the DMP 128 FlexPlus.
a. To connect via TCP/IP (recommended):
Click the tab in the dialog box. Enter the IP address of the device in the
TCP/IP
Hostname or IP Address
field (see figure 24,
Password
b. To connect via USB:
Click the tab in the dialog box. Select the device from the
USB
drop-down menu (figure 24,
c. To connect via RS-232:
Click the tab in the dialog box. Select the com port the device is connected
RS-232
to on the host PC from the
Figure 24. Connect to device... TCP/IP, USB, and RS-232 Dialog Box
3. When a connection with a device is established, the
box opens.
Figure 25. Synchronize with Device Dialog Box
a. Pull — Pulls the configuration file, presets, macros, and ACP configurations from
the device and displays it in the DSP Configurator main workspace.
field. If necessary, enter the device password in the
below).
a
).
b
drop-down (figure 24,
Com Port
Synchronize with Device
DMP 128 FlexPlus • DSP Configurator Software
USB Devices
).
c
dialog
18