Follow Selector; Selector-Vol/Mute (Selector); Button Labels; Using Multiple Acp Panels - Extron electronics DMP 128 FlexPlus User Manual

Follow Selector

A button configured with the Follow Selector control type performs an action that is tied to
a volume group or a mute group, but is dependent on a Selector-Vol/Mute button to define
which group the button affects. The table below shows the drop-down list selections that
are available when
Action
Group Mute On
Group Mute Off
Group Mute Toggle
Group Volume Down
Group Volume Up
Group Vol Rotary (ACP 100 and VC1 only)
Figure 163.

Selector-Vol/Mute (Selector)

Buttons configured as a Selector-Vol/Mute define a gain or mute group. A Selector-Vol/Mute
button acts as a modifier for Follow Selector buttons or controls. For example, if a Follow
Selector button is configured to increase or decrease the volume of a group, a Selector
button defines which gain group is affected by the volume increase or decrease. Two or
more Selector buttons are necessary for Follow Selector buttons to function properly.

Button Labels

Each button can be labeled to match the control type or function assigned to the button. In
the
in identifying the function of each button.

Using Multiple ACP Panels

The two ports on the back of an ACP panel support power from and communication with
the host DMP 128 FlexPlus. Up to eight ACP panels can be daisy-chained together for more
demanding control needs.
NOTES:

Configuration Examples

ACP panels can be configured to meet a wide variety of control needs. The following
configuration procedures are examples of flexible configurations using the default buttons
that ship with the ACP panels. The two configuration examples are covered:
•
•
Follow Selector
Follow Selector Selection Table
text field on the right side of the
Label
• The DMP 128 FlexPlus rear-panel ACP port provides 6 W of power.
•
Use an Extron PS 1220EB power supply or Extron 12 V desktop power supply
when additional power is required. Refer to the ACP panel setup guide for wiring
details.
ACP 100 Configuration Example
ACP 106 Style Configuration Example
is chosen as the control type.
dialog box, type a name to aid
Configure ACPs
DMP 128 FlexPlus • Audio Control Panels 102