Overall Configuration Procedure For The Control Processor - Extron electronics IPCP Pro PCS1 xi Setup Manual

IPCP Pro PCS1 xi • Setup Guide (Continued)

Overall Configuration Procedure for the Control Processor

Within Global Configurator
(GC Professional or
GC Plus mode):
Figure 4. Overall Configuration Steps
For information on safety guidelines, regulatory compliances, EMI/EMF compatibility, accessibility, and related topics, see the
Extron Safety and Regulatory Compliance Guide
Worldwide Headquarters: Extron USA West, 1025 E. Ball Road, Anaheim, CA 92805, 800.633.9876
10
Configure the IP settings
of the control processor,
NBP network button panels, and
TouchLink Pro touchpanels.
If desired or required, use
Toolbelt or other software to con gure
security settings for 802.1X, SSL.
Upload security certi cates, private keys.
Create a new GC Professional or GC Plus project
and add the control processor to it.
Will
TouchLink Pro or
third party touchpanels or
No
other user interfaces
be used?
Con gure ports on the
control processor.
Create monitors, schedules, timers,
macros, and local variables.
Add touchpanels, other interfaces, or
button panels (if used) to the project.
Import GUI layouts and con gure the
touchpanels or other interfaces.
Save the project.
Build and upload the con guration to
the control processor.
Test the system, make adjustments,
nalize con guration.
on the Extron website.
© 2021 - Extron All rights reserved.
All trademarks mentioned are the property of their respective owners.
See Network Network
Communication Setup Communication Setup
on page 3.
Yes
Create GUI layouts for the
touchpanels or other interfaces:
1. Start GUI Designer.
2. Create GUI layout designs for each
TouchLink Pro, third party
touchpanel (with a TouchLink
Interface), or a computer or
mobile device (with LinkLicense).
3. Save and build the GUI layout le.
Or...
Download existing GUI layouts
from identical touchpanels.
www.extron.com
68-3496-52
Rev. A
02 21