Dmp 128 Flexplus Web Page - Extron electronics DMP 128 FlexPlus User Manual

Using the Web Page
Communications Settings Panel
1
RS-232 Settings Panel
2
Device Info Panel
3
Device Name Edit Button
4
Figure 190.
Communications Settings Panel — Displays TCP/IP communication settings. Click
1
to open the
Edit
Figure 191.
From this dialog box DHCP status, IP address, subnet mask, and default gateway can
be edited. The device MAC address can also be viewed in this dialog box.
NOTE: If
not be edited.
RS-232 Settings Panel — Provides a read-only display of device RS-232 settings.
2
Device Info Panel — Displays general device information.
3

DMP 128 FlexPlus Web Page

Communication Settings
Communication Settings Dialog Box
is enabled, IP address, subnet mask, and default gateway can
Use DHCP
Firmware Update Button
5
Date/Time Settings Panel
6
Passwords Panel
7
dialog box and edit the TCP/IP settings.
DMP 128 FlexPlus • Web Pages 167