Extron electronics DMP 128 FlexPlus User Manual page 147

KEY:
X& = Dante Device Name
X2@ = Extron Remote Connection
Mode
X5% = Digital Output
X5^ = Output Mode
= Varies according to output
X5&
mode
= Disconnect
0
= Connect
1
1
= Output always high
0
= Output always low
1
Mutes
= Mute high
2
= Unmute high
3
Group Mutes
= Group mute high
4
= Group unmute high
5
Macros
= Macro started set high once (blink)
6
= Macro started set low once (blink)
7
Presets
= Preset recalled set high once (blink)
8
= Preset recalled set low once (blink)
9
Automix Gate Status
10 = Automix gate on (>1024) set high
= Automix gate on (>1024) set low
11
Signal Presence
= Signal presence (>-40dBFS) set high
12
= Signal presence (>-40dBFS) set low
13
Mutes
Input number for monitoring. If
defaults to the input with the corresponding I/O channel number.
Group Mutes
Group member for mute monitoring. If
matches the group with the corresponding I/O channel number.
Macros
X5^
Macro number. If is not specified, the macro number defaults
to the corresponding I/O channel number.
Presets
X5^
Preset number. If is not provided, the preset number defaults
to the corresponding I/O channel number.
Automix Gate Status
Input number for automix gate monitoring. If
fied, the input number defaults to the corresponding I/O channel
number.
Signal Presence
Input Number for signal presence monitoring. If
fied, the input number defaults to the corresponding I/O channel
number.
DMP 128 FlexPlus • Remote Control and Configuration
X5^
is not specified, monitoring
X5^
is not specified, muting
X5^
is not speci-
X5^
is not speci-
138