Figure 144.
Arranging Devices Into a Folder
Connect to or Disconnect from Device
When DSP Configurator is in Emulate mode, this selection in the
menu reads
Tools
and opens the
dialog box when selected.
Connect to Device
Connect to device...
When DSP Configurator is in Live mode and connected to a device, this selection reads
and disconnects DSP Configurator from the current device
Disconnect from Device
when selected, and returns to Emulate mode.
For detailed instructions on connecting to a DMP 128 FlexPlus, see
Connect to a DMP
128 FlexPlus in Live Mode
on page 17. For detailed instructions on disconnecting from
a DMP 128 FlexPlus, see
Exit Live Mode and Enter Emulate Mode
on page 19.
DMP 128 FlexPlus • Configuration Tools
87