Finding A Dante Device Ip Address - Extron electronics DMP 128 FlexPlus User Manual

6. Press <
7. Repeat steps 4 through 6 to rename additional transmitter channels.
8.
When finished renaming transmitters, close the
Figure 178.

Finding a Dante Device IP Address

To find the IP address of a Dante device, the name of the device is needed (see
the DMP 128 FlexPlus in Dante Controller
NOTE: If the DMP 128 FlexPlus has not been renamed, its default name consists of the
product name followed by a hyphen, plus the last 6 digits of the device MAC address
(for example,
1. Open Dante Controller.
2. On the
figure 179,
3. On the
Device Name
column (
is
192.168.11.120
Figure 179.
> on the keyboard to confirm the name, or click another label text box.
Enter
Device View Screen — Renaming a Transmitter
).
DMP128F-0ee8ee
Dante Controller-Network View
below).
1
page, locate the name of the DMP 128 FlexPlus in the
Device Info
column ( ). The IP address is located in the
2
). In the example below, the IP address for the connected DMP 128 FlexPlus
3
.
Device Info Page
dialog box.
Device View
on page 111).
screen, click the
Device Info
Primary Address
DMP 128 FlexPlus • Dante Controller
Renaming
tab (see
115