Configure Usb Control; Creating Groups - Extron electronics DMP 128 FlexPlus User Manual

To paste a macro action:
1.
2.
To insert a macro action:
1.
2.
3.
To delete a macro action:
1.
2.

Configure USB Control

The Configure USB Control option opens the Configure USB Control dialog.
This dialog allows for Windows communication volume and mute controls and Windows
playback volume and mute controls to affect levels and mute status in the connected Extron
USB audio processor.
Figure 139.

Creating Groups

In order for to assign control groups in the Configure USB Control dialog, the groups
must first be created using the Aux Inputs (see
The following groups must be created with the listed members:
•
•
•
Right click the box furthest to the left in the action list item where the action is to be
pasted.
Select . The action is copied to the list item. Any existing action data is
Paste
overwritten.
Cut or copy a macro action to be inserted.
Right click the box furthest to left in the action list item directly below where the action in
the clipboard is to be inserted.
Select . The action is inserted from the clipboard above the action that was right
Insert
clicked in step 1.
Right click the box furthest to the left in the action to be deleted.
Click .
Delete
Configure USB Control Dialog
USB communications gain group
• USB 1 L
• USB 1 R
USB communications mute group
• USB 1 L
USB 1 R
•
USB playback gain group
• USB 2 L
• USB 2 R
Aux Inputs on page 41).
DMP 128 FlexPlus • Configuration Tools 82