Extron electronics DMP 128 FlexPlus User Manual page 185

Line Pages
Click a tab for configuration options. There are three pages used for line configuration.
Line
Registration Page
Figure 202. VoIP Line Registration Page
To register a SIP account:
1. In the field (see figure 202,
User Name
assigned to the DMP 128 FlexPlus through the call server.
NOTE: "User Name" is referred to as "Line Extension" by some call servers.
2. In the
Authentication User Name
some cases, this will be the same as the user name entered in step 1.
3. In the
Authentication Password
NOTE: If a password is not required by the call server, leave this field blank.
4. In the field (
Display Name
5. In the
Primary Proxy Name/IP
name.
6. In the
Primary Proxy Port
NOTE: If no port number is specified by the user,
7. Click ( ) to commit the changes to the DMP 128 FlexPlus (click
Apply 7
all fields). Committing the changes does not initiate line registration with the call server.
8. Click ( ) to initiate registration with the call server. Registration is confirmed
Register 8
in the field next to the
Status
NOTE: If registration is unsuccessful, refer to the logs page (see
page 179) and contact the VoIP system administrator.
NOTES:
• To unregister a line from the call server, click
•
To clear data from a field, delete the data from the field and click
above), enter the user name currently
1
field ( ), enter a name for the line (optional). In
2
field ( ), enter the call server registration password.
3
), enter a display name for the line (optional).
4
field ( ), enter the call server IP address or domain
5
field ( ), enter the SIP traffic port number.
6
5060
button.
Register
Unregister
DMP 128 FlexPlus • Web Pages
is used by default.
to clear
Clear
Logs Page on
( ).
9
( ).
Apply 7
176