Extron electronics DMP 128 FlexPlus User Manual page 90

To run a Macro:
1. Connect to the DMP 128 FlexPlus in Live mode (see
page 17).
2. Click
Tools > Configure Macros
3. From the
Select Macro
4. Once the macro information is displayed, click
-or-
1. Connect to the DMP 128 FlexPlus in Live mode (see
page 17).
2. Select the macro to be run from the
Figure 137. Run Macro Drop-Down
To edit remote destinations:
1. Click
Edit Remote Destinations
2. Select an existing device from the
3. Edit the information for the device or click
4. Click to save changes made to the remote destination.
Apply
5. Click to close the
Close
NOTE: See step 3 on page 79 for information regarding adding a destination.
Manipulating Macro Actions
After a macro action has been fully configured, it can be cut, copied, pasted, inserted, or
deleted. Right-click the left-most box in the action line item (see
and select an option from the drop-down menu.
Figure 138. Macro Action Manipulation Drop-Down
To cut a macro action:
1.
Right click the box furthest to the left in the action list item to be cut.
2. Select . The action is removed from the list and placed in the clipboard.
Cut
To copy a macro action:
1. Right click the box furthest to the left in the action list item to be copied.
2. Select . The action is copied to the clipboard.
Copy
.
drop-down, choose the macro to be run.
Run Macro
drop-down in the tool bar.
Run Macro
from the
Configure Macros
Unique Device Name
to remove the selected device.
Delete
Edit Remote Destinations
DMP 128 FlexPlus • Configuration Tools
Live and Emulate Panel on
.
Live and Emulate Panel on
dialog box.
drop-down.
dialog box.
figure 136, on page 78)
3
81