Device Manager - Extron electronics DMP 128 FlexPlus User Manual

Device Manager

Device Manager is used to configure and switch between multiple devices in Live or
Emulate mode within DSP Configurator (see
Devices can be placed and ordered in user-created folders for easily tracking systems with
devices across multiple rooms. When Device Manager contains multiple devices, all
device configurations are saved in a single DSP Configurator file.
Select
Figure 141.
1
2
3
4
5
6
Tools > Device Manager
Device Manager Dialog Box
Add Device Button — Click the
screen to select another device to be configured. As a device is chosen or connected, it
is added to the
Device Manager
Clone Device Button —Click the
When a device is cloned, information within the device configuration file is also cloned.
NOTE: If Live mode is enabled, a backup may need to be performed before the
device can be successfully cloned.
Remove Device Button — Click the
device from the device manager. Select a folder and click this button to delete the folder
and all devices it contains.
Expand and Collapse All Buttons — Click the
show the devices it contains. Click the
New Folder Button — Click the
Device List Panel — Lists the devices and folders in Live and Emulate mode. From
this panel, devices can be clicked and dragged into folders, placed in custom order,
and folders can be renamed. If the device is connected via LAN, the device IP is
displayed. Double-clicking a device in this list will initiate a pull (see
128 FlexPlus in Live Mode
The color of the icon next to a device name indicates Live or Emulate status, as well as
whether the device is configured as a Primary or Secondary EXP device. Devices with
color icons are in Live mode. Devices with grayed icons are in Emulate mode. Devices
with blue icons are configured as Secondary units (see
Live and Emulate Panel
to open the
Device Manager
Add Device Button
1
Clone Device Button
2
Remove Device Button
3
Expand and Collapse All Buttons
4
New Folder Button
5
Device List Panel
6
button to open the DSP Configurator splash
dialog box.
button to clone the currently selected device.
button to remove the currently selected
icon to expand all folders and
to collapse all folders.
button to create a new folder to drag a device into.
on page 17).
Expansion Bus
DMP 128 FlexPlus • Configuration Tools
on page 17).
dialog box.
Connect to a DMP
on page 96).
85