Detail Pages: Time Switch Program; General; Week Scheduler - Siemens Climatix Series Basis Document

Calendar in auxiliary
Function
Note
Parameter
Parameter
Present value
Monday
Copy schedule
Tuesday
...
Sunday
Exception
114 / 244
Basis Document Siemens Climatix Control System
Siemens
Page 114
BDCX.100820.01GB
Building Technologies
8

Detail pages: Time switch program

8.1

General

This section describes the functions and entries for time switch catalogs and cal-
endars.
Possible entries vary depending on the configuration. It is set in Configuration 1:
Main Index > Configuration > Configuration 1 > TSP function
Main Index > Configuration > Configuration 1 > TSP steps
The time switch catalog/calendar available in auxiliary has the set entries Off and
On:
Main Index > Configuration > Configuration 2 > Aux TSP output
If no element is active at a higher priority (e.g. Manual Operation <> Auto), the
plant can be switched to off or any stage using a time switch catalog (for analog
controlled fans to the given stage setpoint). A maximum of 6 switching entries are
possible per week.
The calendar Fix Off (in operating mode only) override the calendar exception and
this in turn overrides the normal time switch catalog. Up to 10 periods or exception
days can be defined for each calendar.
TSP function=Steps+Tmp: The time switch program determines both fan stage
setpoint as well as the temperature setpoint (Comfort/Economy).
8.2

Week scheduler

Main Index > Unit > Main overview > Time switch program > Schedule
Range
---
− Passive
− Active
− Monday to
− Tu to Fr
Standard application AHU
Detail pages: Time switch program
Function
Resulting switching command from the sched-
uler.
Display is enabled of the present day is Monday.
The last entry for the day applies to 23:59. Go to
the daily switching plan for Monday.
Copies entries for the time switch program from
Monday to Tuesday through Friday:
− Passive position (copy disabled).
− Copy starts. Returns to display.
Similar to Monday.
...
Similar to Monday.
Displays the enabled command, when the pre-
sent day is an exception day. Go to daily switch-
ing plan for exception days.
CE1P3977en_02
01.02.2010