Siemens Climatix Series Basis Document page 137

Reset required !!
Par service load
Par factory load
Par service save
Par factory save
Application default
Siemens
Building Technologies
− 
− Execute
− 
− Execute
− 
− Execute
− 
− Execute
− 
− Execute
− 
− Execute
Basis Document Siemens Climatix Control System
Standard application AHU
BDCX.100820.01GB
Save / restore parameters
Resets after downloading parameters.
− Passive position.
− Reset. The controller operate using the con-
figuration loaded from the SD card.
Requires access level 6.
Downloads parameter files from commissioning.
− Passive position.
− Download. The display than returns to ser-
vice load.
Requires access level 4.
Downloads parameter files from factory.
− Passive position.
− Download. Display returns to .
Requires access level 4.
Saves parameter files from the commissioning to
the controller.
− Passive position.
− Save. Display returns to .
Requires access level 2.
Saves parameter files from factory.
− Passive position.
− Save. Display returns to .
Requires access level 2.
Download configuration with all parameters per
the overall standard program loaded at the fac-
tory. Requires complete re-commissioning!
− Passive position.
− Download. Display returns to .
137 / 244
CE1P3977en_02
Page 137
01.02.2010