Time Switch Program - Details; Week Scheduler - Siemens Climatix Series Short Manual

Aux-time sched. program
Function
Note!
Parameter
Parameter
Present value
Continuous operation
Monday
Copy schedule
Tuesday
...
Sunday
Exception
Period:Start
Period:End
Short Manual for Climatix Control System [v. 2.14.10, 2.14.20, 2.14.30 & 2.14.40]
SMCX.130215.02GB
2.3

Time switch program - details

This section describes the functions and entries for time switch programs and
calendars.
Possible entries vary depending on the configuration. It is set in Configuration 1:
Main menu > Configuration > Configuration 1 > TSP function.
Main menu > Configuration > Configuration 1 > TSP stages
The auxiliary time switch program has the set entries Off and On:
Main menu > Configuration > Configuration 2 > Aux.TSP.
When no elements with a higher priority (e.g. Manual Operation <> Auto) are enabled,
the plant can be switched Off or any stage (for frequency controlled fans to the given
stage setpoint) using the time switch program. A maximum of 6 switching time
entries are possible per week.
The calendar Fix Off (in operating mode only) overrides the calendar exception and
this in turn overrides the normal time switch program. Up to 10 periods or exception
days can be defined for each calendar.
TSP function=Step+tmp: Both the fan stage setpoint and the temperature setpoint
(Comfort/Economy) are determined by the time scheduler.
2.4

Week scheduler

Quick menu > Time switch program > Schedule
Main menu > Unit > Operating functions > Time switch program > Schedule
Value
---
No
Stage 1
Stage 2
Stage 3
Mon. to
Tues.–Fri.
Tues.–Sun.
Function
Switching according to schedule or mode selected
for continuous operation.
The Continuous operation function is switched off.
The unit runs according to the TSP schedule.
The unit runs constantly at operating stage 1.
The unit runs constantly at operating stage 2.
The unit runs constantly at operating stage 3.
Displays enabled command if present day is Monday.
Last entry of the day applies to 23:59 (11:59 PM). Go
to daily switching schedule for Mondays.
Copies entries for the time switch program from
Monday to Tuesday through Friday:
Passive position (copy disabled).
Copying starts. Returns to display.
Copying starts. Returns to display.
Same function as for Monday.
...
Same function as for Monday.
Displays enabled command if present day is an
exception. Go to daily switching schedule for
exception days.
(Available at Technical access level only.)
Start date for weekly schedule.
The entry *,* *.00 denotes that the weekly schedule is
always enabled. ---> Enable weekly schedule.
(Available at Technical access level only.)
Start date and time for when the weekly schedule no
longer applies.
Page 13